PINI KAY BRIQUETTES

Pini Kay Briquettes
Combusting temperature: 4500 Kcal/кg
Moisture: around 7%
Ash content : around 0,6 %
Mechanical durability: 95%
Partly destroyed briquettes:14%
Size : 65x65x230mm
Packaging: 12 pieces in vacuum (10kg), 96 packages on pallet (960kg)

Description

Product description;
PINY KAY briquettes or PINI KAY briquettes consist in rectangular form agglomerations with easy stacking and handling. Because of the hole in these Briquettes, it reduces amount of smoke. These Briquettes are produced by pressing dry chipped wood at high pressures and high temperatures. They have the maximum burning time and produce the maximum useful heat. Piny and Kay fuel briquettes are remarkably resistant to mechanical action and moisture and store well.

Pini Kay Briquettes fireplace briquette burns slowly, which gives off more heat, thus saves money. The unique technology of producing this briquette enables aesthetic combustion, without absorbing moisture from the air, and prevents contamination of heating devices. https://www.primebioenergy.com/

Types of Wood Briquettes:

RUF Oak Briquettes
RUF bark Briquettes https://www.primebioenergy.com/product/holzpellets/

– Pini Kay Briquettes:
Combusting temperature: 4500 Kcal/кg
Moisture: around 7%
Ash content : around 0,6 %
Mechanical durability: 95%
Partly destroyed briquettes:14%
Size : 65x65x230mm https://www.primebioenergy.com/product/pasutit-koksnes-granulas-6mm/
Packaging: 12 pieces in vacuum (10kg), 96 packages on pallet (960kg)

– RUF Briquettes:
Combusting temperature: 4940 Kcal/kg
Moisture: around 8%
Ash content : around 0,85%
Mechanical durability: 95%
Partly destroyed briquettes: 3%
Size : 60 х 90 х 150 mm
Packaging: 12 pieces in vacuum (10kg), 96 packages on pallet (960kg)

– Specifications of wood Briquettes (Pini Kay Briquettes):
– Nestro Briquettes:
Briquettes size: 85/90 x 85 x 320
Humidity: 5-6 %
Calorific value: 18,5 MJ/kg
Ash: content: 0.3-0.5 % https://www.primebioenergy.com/product/wood-pellets-enplus-a1/

Standard Packing of Pini Kay Briquettes:
Pack – 10 kg bags
Containing – 12 briquettes.
Full pallet – 96 packs.
Weights – 960 kg. https://www.primebioenergy.com/product/pine-wood-chips/

– Peat Briquettes:
Combusting temperature: 3700 – 3900 Kcal/кg
Moisture: around 16%
Ash content : <2%
Mechanical durability: 95%
Partly destroyed briquettes: 2%
Size : 170 х 70 х 50 mm
Packaging: Big bag -500 kg and 20 kg bags https://www.primebioenergy.com/product/epal-euro-pallet/

– RUF Bark Briquettes (Pini Kay Briquettes) Description:
Combusting temperature: 4200Kcal/kg
Moisture: around 8-12%
Ash content : around 1%
Mechanical durability: 95%
Partly destroyed briquettes: 2%
Size : 155 x 110 x 65 mm
Packaging: 12 blocks weights around 10 kg, 96 packs on pallet https://www.primebioenergy.com/contact-us/

A briquette is a French word and also spelled as briquet, is a compressed block of coal dust or other combustible biomass material e.g. charcoal, sawdust, wood chips, peat, or paper used for fuel and kindling to start a fire. The term derives from the French word brique, meaning brick.

Application & Uses of Briquettes:
Boilers (sugar mills, paper mills, chemical plants, Cement, food processing units, oil extraction units etc.) using fuel for steam generation and heating. Pini Kay Briquettes

Unlike the pure lump charcoal, briquettes are manufactured wood by-products compressed with additives that help them light and burn consistently. They provide a more stable burn, maintaining a steady temperature for a longer period of time with less hand holding then lump charcoal. Pini Kay Briquettes

Biomass briquettes are a biofuel substitute to coal and charcoal. Briquettes are mostly used in the developing world, where cooking fuels are not as easily available. There has been a move to the use of briquettes in the developed world, where they are used to heat industrial boilers in order to produce electricity from steam. The briquettes are cofired with coal in order to create the heat supplied to the boiler.

Fuel briquettes generated by the low-pressure compaction of paper, sawdust, agricultural or yard waste, etc. currently serve as an alternative to firewood, wood pellets and charcoal in developing countries in Africa, Asia and South America. Pini Kay Briquettes

The materials for bio briquettes including paper, leaves, pine needles, sawdust and shop waste were ground into particles of 6 to 8 millimeters (mm) in diameter to increase surface area for soaking and to enhance packing efficiency. Briquettes made entirely of shredded paper were prepared by the addition of just enough water to cover the material and soaked for approximately one week. As the ratio of biomass to shredded paper increased, the amount of time required to soak the material for successful molding also increased. For instance, bio briquettes made entirely of shredded leaves required approximately five weeks soak time before pressing. The soaked material was tested for readiness by pressing a scoop of the mash by hand. Mash that held its form in the palm of the hand was considered ready to be pressed into briquettes. Pini Kay Briquettes

Combustion Analysis:
The combustion tests were carried out in a fume hood with a face velocity of 30.5 meters (m) per second, to provide a steady flow of air. Biobriquettes, weighing on the order of 100 g each, were placed on a wire mesh stand 21 centimeters from the floor of the hood and enclosed in a modified Weber chimney stove topped with wire mesh.

A Bunsen burner placed under the briquette served as the ignition source. Once the biobriquette had begun to combust, the ignition source was removed and a 2-liter (L) aluminum saucepan containing 500 milliliters (mL) of deionized water was placed on top of the stove (Figure 2). This process was implemented in order to monitor the heat output from the biobriquette once the Bunsen burner was removed. Pini Kay Briquettes https://www.primebioenergy.com/product/kiln-dried-firewood/

The temperature of the water bath was recorded by the Vernier Logger Pro device interfaced to a computer, which measured the temperature change in the water every second over a span of 4,000 seconds (just over an hour). The four types of briquettes mentioned earlier were combusted in this study. In addition, traditional fuels including charcoal, wood and wood pellets were ignited and energy output was monitored under the same set of conditions (i.e. mass of 100 g, consistent ignition time by Bunsen burner, same method of recording heat output). https://www.primebioenergy.com/product/hardwood-charcoal/

Briquettes of each composition were tested from two to four times whereas traditional fuel sources were tested thrice each.

The combustion characteristics of fuel briquettes made from Idigbo (Terminalia ivorensis) charcoal particles, pinewood (Pinus caribaea) sawdust and their agglomerates using gelatinized cassava peels were investigated. Pini Kay Briquettes

The charcoal particles and pine sawdust were blended in the mixing ratios of 90:10, 80:20, 70:30, 60:40, and 50:50, respectively and vice-versa. More so, briquettes were produced from pure charcoal particles and pine sawdust separately for the purpose of comparison with the blended briquettes.

The gelatinized binder was 5% of the total briquettes weight. The briquettes were produced using a pressure of 5 MPa with a dwelling time of 5 min in a hydraulic briquetting machine. Proximate, elemental compositions and heating value analyses were carried out on the raw charcoal, sawdust, cassava peel, and their briquettes. The results showed that variations in the mixing ratios of the bio-residues had significant effects on all the properties investigated. Pini Kay Briquettes https://www.primebioenergy.com/product-category/charcoal/

An increase in the charcoal particles led to an increase in the fixed carbon content and heating value of the briquettes. Conversely, higher pine sawdust content in the briquette resulted in higher volatile matter content and lower heating value. The briquette made from pure charcoal particles had the highest heating value (24.9 MJ/kg) and ash content (6.0%). Pini Kay Briquettes

Its carbon, hydrogen, and oxygen contents were in the range of 44.6–50.1%, 5.1–5.6% and 34.4–41.5%, respectively. The proximate analysis, elemental composition analysis, and heating values of the produced fuel briquettes depicted that they have better combustion properties when compared to the raw charcoal, pine dust, and cassava peel.

Thus, the produced briquettes would serve as good fuel for domestic and industrial applications. Pini Kay Briquettes https://www.primebioenergy.com/product-category/wood-briquettes/

Reviews

There are no reviews yet.

Be the first to review “PINI KAY BRIQUETTES”

Your email address will not be published.